Yongnuo YN-622C User's Guide download pdf (Page 38)

The Other YN-622C User Guide v.4.07

23/07/2014

Part III – C-TX Controller Page 38 of 62

The LCD Display

Groups screen

• The default Groups screen is shown in the image.

• The last-used screen appears at power-on.

• Various operations terminate and return to Groups

by Timeout,

by pressing [Set/OK],

by cycling through from a selection operation.

• Pressing any button will light the backlight briefly. Use

[Set/OK] to avoid accidentally changing a setting.

• Most procedures assume starting from Groups.

• There are six lines.

Line 1: Current sync mode, and battery level,

Line 2: Operation labels and icons, and current channel.

Line 3: Zoom setting for each group.

Lines 4 - 6: Group flash mode and user adjustment.

Line 6 will also show on the right the AF-beam icon, if it is enabled.

• Lines 4 to 6 are interactive rows. The active row is selected with [Gr], and is indicated by

the triangle on the left of that row.

• Other icons may appear in the top or right areas.

Indicators

Status Indicator (LED)

• In stand-by, the Status light is off.

• When communicating it is green.

• It turns red briefly when the shutter is released.

Battery charge Indicator

• The three bars (top right icon) will show when fully charged.

• As the stored voltage drops, the bars will disappear, starting from the right.

• When the icon winks, the battery is exhausted and must be replaced,

Access and Visibility

In a studio situation, and especially when the camera is on a tripod, a good-quality full Canon

E-TTL cord can be used to move the C-TX off-camera to a more accessible position.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 61 62

No comments

Yongnuo YN-622C User's Guide Page 38