Yongnuo YN-622C User's Guide download pdf (Page 17)

The Other YN-622C User Guide v.4.07

23/07/2014 Part 1 – The System Page 17 of 62

Type C Camera – Sync only

• Does not support HSS or E-TTL functions.

• Max speed sync is 1/250s or less.

622C Transmitter and C-TX Controller using all flash classes: A “fire!” synchronised signal

• A camera with a standard single-pin hot-shoe.

• A camera with a PC-sync-out connection.

• A non-Canon ISO multi-pin hotshoe with an adapter to allow only the centre (X-sync) pin to

be accessible (e.g. Nikon).

• A brand-specific hot-shoe with an adapter to Canon hotshoe (e.g. Sony/Minolta).

FLASH COMPATIBILITY

Flashes can be grouped into five classes.

• The 622C is rated at only 6 volts on the trigger contact of its hot-shoe. The PC-sync

connection can withstand 300 volts.

Class 1 Flash – Remote E-TTL; Remote Manual Levels

622C: Set using External Flash menus not the on-Flash buttons.

C-TX: Set on C-TX, or by External Flash menus. On-flash settings are available for special lighting.

Brand HSS No HSS

Canon 580EX II, 600EX-RT

No Multi: 270EX II, 430EX II

Godox Ving V860C

Jessop No Multi: 360AFDC

Metz No Multi: 50 AF-1, 58 AF-2

Neewer NW680

Nissin Di866 II

Phottix Mitros

Yongnuo YN-500EX, YN-568EX YN-465, YN-467 II, YN-468 II, YN-565,

YN-565 II (YN-467, YN468 ?)

Class 2 Flash – Remote E-TTL; Flash-set Manual Levels

622C Set On-Camera: Sync mode (1CS, 2CS, HSS); ETTL (FEC, FEB, FEL and Ratio).

Set on-flash: Flash mode (ETTL, M, Multi); Zoom; Manual levels.

C-TX Set on C-TX: or by External Flash menus For remote Manual levels on Canons, set C.Fn 05

to “On”, and set the mode on Flash to “E-TTL”.

Brand HSS No HSS

Canon 550EX, 580EX. No Multi: 430EX

Metz No Multi: 48 AF-1, 48 AF-2,

54mz4 (Mix mode, Wireless disabled)

Nissin Di866 Di622 II

Sigma No Multi: EF 500, 530, 610 DG Super

Sunpak No Multi: Z42X

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

No comments

Yongnuo YN-622C User's Guide Page 17