Yongnuo YN-622C User's Guide download pdf (Page 30)

The Other YN-622C User Guide v.4.07

23/07/2014

Part II – 622C Transceivers Page 30 of 62

CAMERA FEATURES

Ambient-only shot

• Turn transmitter off. 622C settings are remembered when powered up again.

• Or use type A camera menu Flash Firing – Disable.

High-speed Continuous Shooting

• Trigger keeps up with camera. (Tested at 6.5 fps.)

• An external flash battery pack is recommended for maintaining flash output consistency.

Live View

• Silent Mode must not be enabled, as Canon then prevents flash from firing.

• In Live Mode with Autofocus or Face Detection, the AF-assist beam will not be emitted.

• If AF-assist is not enabled, use the AF-ON camera button during Live View.

Modelling Light

• Works as designed. All flashes fire, including an on-TX flash.

FLASH FEATURES

Flash Zoom (Flash Coverage)

Canon provided a flash head zoom to provide lighting just wide enough to cover the lens’s field of

view. When the flash is off-camera, the lens zoom is irrelevant. Consider the zoom as a light

modifier, for efficiency or artistic reasons. The 622C provides more flexibility than Canon’s

implementation. This may be affected by Canon’s rules –

Wide panel extended: 14mm

Head in Bounce on Auto: --mm

Head in Bounce on Manual: as set

Auto-adjust for sensor size enabled.

Zoom Lock

An individual flash under remote control can have its zoom setting locked so that it is not controlled

by the camera’s zoom menu setting.

• Hold down [CH SET] on a 622C Receiver for several seconds until the channel indicator

stays lit. (This is the same as setting mix control on a transmitter.)

• Adjust the flash zoom setting with the External Flash panel (automatic or manual).

• Hold down [CH SET] for several seconds to cancel. The channel indicator will go out.

Zoom and Remote Control

• Remote Control – camera zoom settings apply. Auto; Manual 24 to 105mm (or 200mm).

• With automatic setting, focal length of the flash may change with lens focal length.

• With manual setting, focal length of the flash supports manual setting (24-105mm).

Zoom and Mix Control

• The camera’s zoom menu setting is disabled.

• Set each flash’s zoom setting on-flash – Auto, Manual 24 to 105mm (or 200mm).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 61 62

No comments

Yongnuo YN-622C User's Guide Page 30