Yongnuo YN-622C User's Guide download pdf (Page 45)

The Other YN-622C User Guide v.4.07

23/07/2014

Part III – C-TX Controller Page 45 of 62

Enable remote Manual control on pre-2007 flashes [Fn] 05 EX Compatibility

Function 05 provides remote control in Manual mode for early E-TTL-capable Speedlites, e.g.

380EX, 430EX, 550EX and 580EX.

On remote 622C

• Set to the desired group.

• Set the flash itself to E-TTL.

• The flash’s screen will not display the flash output.

On C-TX

• Long-press [Fn] then [UP] repeatedly until Fn 05 -

ECO is displayed.

• Default is Off. Turn On only when required.

• Press [Left] or [Right] to toggle Off to On.

• Press [Set/OK].

• In Groups screen, set the flash’s group to M mode.

• Set a test output level for the group.

• Take a shot.

• Adjust the group’s output level using [Left], [Right], [Up] or [Down].

Mixed flashes

• Early and late models flashes (e.g. 550EX and 580EX II) can be included in the same

group, or in different groups.

•

Enable Free Mask cutout image [*]

Free Mask provides a silhouette cutout image of a dark

subject and a fully-lit background for post-processing.

• Default is “not enabled”.

• Take a fully-lit image of the subject.

• Long-press [*]. The screen will show a special case of

Groups, with both A and B groups set to Off, leaving C

still enabled.

• Take one or more mask images of the subject.

• Return to previous settings in use by long-pressing [*].

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

No comments

Yongnuo YN-622C User's Guide Page 45