Yongnuo YN568EX User Manual

I. Warning To avoid fire or electrical shock, do not expose this product to rain or moisture. To avoid short circuit, be sure the batteries contac

VI. Basic Functions 1. Button Operation: Parts Operation [ON/OFF] Turn on or off the power of speedlite by pressing this switch for a long time. It

Meaning of [Charging indicator] Status of [Charging Indicator] Meaning Operation The red light is lit The speedlite is fully charged, and can be u

2. Power-on and Power-off The power of the speedlite can be turned on or turned off by pressing [Power Switch] button 2 seconds. It is suggested th

adjustment increment, totally 29-grade fine adjustment at most; adjust whole grade brightness with [Left] and [Right] button, and make fine adjustmen

6. Sc/Sn and S1/S2 Mode Set the speedlite to be Sc by pressing the [MODE] for a long time, and then operate [MODE] button, and the speedlite shall sw

S1 and S2 modes are suitable for MANUAL flash environment and TTL flash environment respectively. Under these two modes, the way to adjust the output

7. Menu Access of Camera (only for the more recent Canon models) You can control the speedlite by accessing to camera menu on the recent canon models

NO. Scope of Application Options Power saving mode - - Power saving mode is turned on 01 SL EP All modes on Power saving mode is turned off 6

11. ZOOM Setting the Flash Coverage Auto Zoom: Press the [ZOOM] button to adjust the flash coverage (auto/24 / 28 / 35 / 50 / 70 / 80 / 105mm), if

Tick tick tick The exposure may be excessive Adjusting exposure compensation or charging shooting condition Tick—tick twice—tick twice Th

II. Features z SUPPORTS HIGH-SPPEED SYNC FLASH With high-speed sync (FP flash), the YN568EX can synchronize with all shutter speeds, the maximum shu

VII. Wireless Flash System One YN568EX is able to respectively accept internal flashing of 580EX II, SB-900/800/700, 7D/60D/600D, C-commander of N’s

3. Multi-Speedlite, Wireless lighting configurations You can create two or three slave groups to make shooting effect better meet your requirements,

Press the test button of master to test whether the flash works normally; if the flash does not fire, adjust the slave unit’s angle toward the master

5. Shooting Examples with Wireless Flash System z Master unit: 580-II, SB-900/800/700, 7D/60D/600D with built-in commander mode, Nikon c-commander a

2. Ultra-long-range Wireless Flash YN568EX can receive remote wireless signal. The longest distance used indoors is 25 meters and the longest distanc

[High-speed /rear-curtain sync] hotkey on panel of YN568EX. NOTE: When YN568X is used as slave unit, the rear-curtain sync function cannot be set.

7. FV Lock (Nikon) Set the AE-L/AF-L function as FV Lock on the camera before using this function. At this time, you can aim at your desired object i

Fn NO.: 03 Fb CL on：FEB auto cancel is enabled Fb CL﹣﹣：FEB auto cancel is disabled Fn NO.: 04 Fb 0 － ＋：Sequence of FEB is “0→－→＋” Fb － 0 ＋：Sequ

Fn NO.: 09 AP S A1：Automatic identification enabled AP S﹣﹣：Disable Fn NO.: 10 SL Sd 10：Power automatic off of the slave unit is 10 minutes SL Sd

Fn NO.: 20 So nd on：Sound prompt function is enabled So nd﹣﹣：Sound prompt function is disabled Fn NO.: E1 SE oF 3/5/10/30/1H/2H/3H/4H/5H：Keeping id

z COMPREHENSIVELY SUPPORTS TTL FUNCTIONS HSS, FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu accessable. z REMOTE WIRELESS

Fn NO.: E3 L cd 7/15/30：The display time of LCD backlight is 7/15/30 seconds Fn NO.: E4 I nc 0.3：0.3ev for fine-tuning step I nc 0.5：0.5ev for fi

9. High-speed continuous shooting The flash can realize the high-speed continuous shooting function. Please set the camera in the continuous shooting

photos, it will produce a highlighted point on the eyes of the subject and thus make the eyes charming (catch light). This function can reach optimal

VIII. Specifications Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 58 (ISO 100, 105mm) F

Guide Number of different focal length range (at ISO 100, in meters / feet) Flash Coverage (mm) Flash Output 14 24 28 35 50 70 80 105 1/1 15/49.2

3. Photos are under exposure or over exposure? Check if the set shutter, aperture and ISO are too near the flash limit or if some settings including

III. Quick Start If you don’t have much time to read the whole user manual, we advise you to read this section. 1. Please avoid the excessive use of

IV. Nomenclature 1．Reflection board 2．Wide-angle diffuser 3．Flash head 4．PC port (for input) 5．Contact cover 6．Battery chamber’s cover 7．Wireles

14. LCD screen: Display all functions and application setting of speedlite, convenient for users’ examination and quick setting. 15. High-speed /rear

V. Installation Instruction 1. Install Batteries Slide the batteries chamber’s cover in the direction of the arrow. Insert the batteries according to